READY FOR SKIN. SEALED ALL FOAM EDGES WITH CAULK AND COVERED WITH GORILLA TAPE.
HOME DEPOT FLASHING
CUT MY PIECES BEFORE BOLT TOGETHER
GOING TO BE TOUGH HANDLING THE CURL. SO FOLLOW THIS PROCESS.
FIRST CLAMP ON SOME LINE UP BRACKETS.
AT ALL CORNERS
1/4" PLY
2 HANDLES TO HOLD IT
WRAP IT WITH 30# FISHING MONOFILAMENT
GO AROUND AGAIN AND DRAW IT TIGHT
SMEAR WITH CONTACT ADHESIVE. USE LOTS
SCOTCH DOUBLE SIDE TAPE. BLACK IS 2X STRONG THAN GRAY.
HOME DEPOT PAINT DEPARTMENT. ALSO COAT WITH CONTACT ADHESIVE.
GET THIS RIGHT FIRST TIME BECAUSE WHEN IT STICKS...........
YOU'RE STUCK. LINE UP ON GUIDES AT BOTTOM THEN PUSH UP FLUSH
CUT STRINGS AND PULL OUT. THIS IS WHY YOU USE MONO
PRESS HARD
1" OVER LAP. PAINTER TAPE AS GUIDE LINE. RESET AND CLAMP GUIDES.
FLASHMATE FRO HOME POT. MAKE SURE IT'S WARM
ON FRONT MADE WIDE OVERLAPS USED HENRY ROOFING CEMENT FOR ADHESIVE
SHOVED A PIECE IF 1/8TH FLAT STOCK IN TO GET SQUARE EDGE FOLD
ALUMINUM SCREWS (LOWES) SO NO BIMETAL CORROSION, BUT VERY SOFT AND EASY TO BREAK OFF. TAPPED EVERY HOLE. USED RED THREAD LOCKER.
No comments:
Post a Comment